DMC Wall Hanging - PAT1405 - Downloadable PDF

DMC Wall Hanging PAT1405 – Free Downloadable Punch Needle Embroidery PDF Pattern

This DMC Wall Hanging pattern (PAT1405) is a free downloadable PDF from the DMC Library that guides intermediate crafters through creating a decorative textile wall hanging using 3D punch needle embroidery combined with crochet finishing techniques. The finished piece is designed to be displayed as a framed fabric panel suspended from a rod, making it a striking piece of handmade home décor. The pattern is presented in multiple languages — French, English, Dutch, Portuguese, Italian, German, and Spanish — making it accessible to a wide international audience.

What Is Being Made

The project produces a textile wall hanging worked in punch needle embroidery on Aida fabric, finished with a cotton fabric backing and decorative fringe. The completed hanging is mounted on a rod for display. The design falls under DMC's 3D Embroidery & Crochet Crafts category, meaning the looped pile created by the punch needle technique gives the surface a raised, dimensional texture that distinguishes it from flat embroidery.

Techniques Used

• Punch needle embroidery – The primary construction technique. A punch needle tool is pushed repeatedly through an open-weave fabric to form loops on the reverse side, building up a dense, textured pile surface. This is an intermediate-level skill requiring consistent loop height and tension for an even finish.
• Crochet finishing – Referenced alongside the punch needle work as part of the broader craft category, likely used for edging, joining, or decorative detail on the hanging.
• Fabric backing assembly – Two separate pieces of cotton fabric (piece A and piece B) are incorporated into the construction, providing a clean reverse side and a casing or hanging tab for the rod.
• Fringe making – A separate fabric or yarn fringe is added to the lower edge of the hanging, contributing to the decorative, bohemian aesthetic typical of textile wall art.
• Rod mounting – The finished panel is threaded onto or attached to a wooden or decorative rod for wall display.

Stitches and Methods

• Punch needle looping – The core stitch of this project, formed by the repeated insertion of the punch needle through the Aida ground fabric. Each insertion creates a loop on the working surface; the density and direction of these loops produce the colour-filled design shown in the included colour guide / diagramme en couleur.
• Wool needle finishing – A wool needle (also called a tapestry or darning needle) is used to secure thread ends, weave in tails, and complete any hand-stitched assembly steps between the embroidered panel and the cotton backing pieces.

Materials Required

Punch Needle Tool

• DMC Punchneedle Regular 10 (U1899/10) – This is the specific punch needle tool called for across all language versions of the pattern. The size 10 regular needle is suited to medium-weight yarn and produces a standard loop height appropriate for decorative textile work.

Fabric

• DMC Aida fabric DC29SO/T1 – The punch needle ground fabric, specified at 2.4 points per centimetre / 6 count, measuring 38.1 x 45.7 cm. Aida's open, even weave makes it ideal for punch needle work as the needle passes cleanly through the holes without distorting the fabric threads.
• Cotton fabric piece (A) – Measuring 27 x 42 cm, used as the main backing panel.
• Cotton fabric piece (B) – Measuring 24 x 8 cm, used as a smaller secondary backing or hanging casing piece.

Yarn

• DMC Natura XL – The yarn specified for this project. Natura XL is a chunky-weight, 100% cotton yarn from DMC, well suited to the size 10 punch needle and producing bold, well-defined loops with a soft, matte finish. Its cotton composition gives the finished wall hanging a clean drape and colour clarity.

Additional Materials